Категории
Теги
Архив
Injection Machine Complete Guide: Detailed Working of Injection
-
Автор master machinery - Категория Развлечения - #Injection Machine #master-machinery #bottle machine - 233 просмотров
Injection molding machine, also known as Injection Machine , is a special machine for manufacturing plastic products. Most injection molding machines are mainly composed of two parts: injection device and clamping unit. The injection unit is responsible for heating the poured plastic pellets into liquid. The clamping unit is used to carry the mold and provide the force required for mold closing, mold clamping and other actions. In general, the injection molding machine has the advantages of fast processing and fare economical cost.
Types of Injection Molding Machines
Injection molding machines have two primary parts, the injection unit and the clamping unit, but the ways each part can work differ among types of machines.
Power Source
Hydraulic - Most common among injection molding machines, they are run by a hydraulic pump and a fixed speed electrical motor.
Electrical - Functions are digitally controlled and powered by an electrical servo motor.
Hybrid - Also known as servo-hydraulic machines, they feature hydraulic power and on-demand electric motors.
Detailed Working of Injection Molding Machines
An injection molding machine consists of four major parts- the feed hopper, screw, heated barrel, and the mold cavity.
Injection molding involves two basic steps:
Melt Generation by a rotating screw.
The propelling movement of the screw helps to fill the mold cavity with the molten resins which passes the injected resin under high pressure.
A hopper and runner system is used to place the raw plastic resins into a heating barrel carefully.
There’s a reciprocating screw inside the barrel which creates heat with a frictional force with heater bands. The plastic melts there.
As the machine is still moving (with the help of the screw), the plastic is then injected through a nozzle from where it gets inside a mold cavity through a gate system. It almost looks like a tunnel.
Finally, we get the desired shape of the plastic resins, which cools as it is inside the cavity.
While the plastic is inside the cavity, the Bottle Machine applies a holding pressure. If you didn’t know, particles expand when they heat.
When the molded plastic inside the mold cavity cools down, its volume will decrease as well, so we need some pressure to compensate for that.
Ejector pins are used to take the material out from the machine after it solidifies.
As the screw moves, another batch of granular plastic is fed to the heating barrel. The process continues from there, and the ejector pins help remove the injection mold plastics after it cools and hardens.
Master Packing Co.,Ltd Plast has earned an excellent reputations for best quality machines, reliability through machines best performance. The key to our success comes from innovative design, quality machine performance, considerate after sales services. Due to the support of our experienced techno-commercial personnel, our customers place complete trust & reliance on Master Packing Co.,Ltd Machinery. Click https://www.master-machinery.com/product/bottle-machine/ to know more information.